Indoor Air Quality West Chicago IL

State Automatic – Call 630-879-8600 – Indoor Air Quality West Chicago IL

When winter conditions arrive in Illinois, homeowners just want to remain comfortable indoors. Staying warm, however, is about a lot more than simply turning the heat up on your thermostat. Read on to learn more about the benefits of duct sealing and how it can keep your household comfortable. Plus, it helps conserve energy too.

-Increases your household’s comfort level. Initially after installation, new ductwork systems function seamlessly. They move air from your furnace or air conditioner to each room throughout your home. But after a while, ductwork systems can start to show signs of deterioration such as cracks, leaks and holes. This sort of wear and tear permits air to leak out from the ductwork instead of circulating through the home.

Often, homeowners are not able to spot these problems right away. Our team at State Automatic can detect these common ductwork problems during an inspection. After we seal the holes and cracks in your ductwork system, you’ll likely experience a noticeable improvement. Rooms that before never felt sufficiently warm enough will get the warm air they need to keep you comfortable.

-Improve the indoor air quality in your home. Your home’s heating and cooling system is critical to its air quality. But even when homeowners regularly change air filters, leaky ductwork can result in poor air quality. Consequently, that can trigger allergies and other respiratory problems. This is because leaking ducts can do much more than allow dust to circulate throughout your home. They can also create a place where mold, mildew and bacteria thrive.

Indoor Air Quality West Chicago IL

Our staff of technicians are here to help you get rid of those potentially hazardous contaminants leaking from your ductwork. To eliminate major air quality risks, we might also suggest replacing your air filters more often. Investing in an air cleaner that functions along with your HVAC system may also be a helpful solution.

-Lower your home’s energy usage. If your home’s ductwork system continually leaks warm or cool air, the wastefulness can add up. Leaking ductwork can waste a significant percentage of the energy that the system consumes. Whether you depend upon an electrical heat pump or a gas furnace, this lost energy will drive up your utility bills.

Aeroseal technology will enable you to consume less household energy by eliminating waste. Instead of just repairing holes and cracks, Aeroseal technology relies upon polymers that attach to gaps in the ductwork system. This action seals leaks completely and restores efficiency.

Besides decreasing your HVAC system’s energy usage, ductwork sealing can help lower your utility bills. Naturally, once you cease wasting so much energy to heat or cool your household, you’ll notice a savings. In fact, the money you’ll save on utilities can easily help cover the investment in ductwork sealing. Another benefit is that the utility savings will last for much longer than a few months or so.

You’ll continue to enjoy the savings for ductwork sealing for a several years down the line.

-Extend the service lifespan of your heating and cooling system. After ductwork sealing, your HVAC system doesn’t need to labor so long to provide comfort. That means it runs with more efficiency, need major repairs less often and provide a longer service lifespan.

For any Illinois homeowner looking to conserve on HVAC costs, this is a significant benefit. Fewer repair calls and more time in between system upgrades means savings.

-Increase safety with ductwork sealing. If your home depends on a gas-powered furnace, water heater or clothes dryer, consider duct sealing. Appliances that are gas-powered all emit combustion gases. Ideally, they should exit your house via a ventilation system. A leaking ductwork system, however, may ventilate carbon monoxide and other hazardous gas into your living areas. Fortunately, sealing your ductwork system and scheduling routine HVAC maintenance can keep your home free of this health risk.

The Aeroseal Advantage

Aeroseal is a relatively simple procedure that ensures thorough sealing in a matter of hours. We apply our reliable technologies to your residential heating and ventilation system for the distribution of the sealant formula. Water-based and non-toxic, our formula seals all the gaps in your ductwork and vents. It ensures that air goes where you want it to go. Homeowners gain peace of mind by seeing the results in real time as the process seals the gaps. We even provide a certification of completion that shows the results.

Here’s a quick summary of the Aeroseal process:

-To start, our technician blocks off the registers and vents, which pressurizes your system. We also block off your furnace’s internal parts to prevent the sealant from blowing through the ductwork. This pressurizing of the system enables the technology to reach all the holes and gaps where air leaks are occurring.

The next step is to connect the Aeroseal machine in order to measure the leakage that’s occurring. This provides “before” information.

-Now it’s time to start distribution of the sealant throughout your duct system and air vents. Our technician monitors this as it is ongoing and shows you the improvements as they’re happening. Because the technology is so accurate, we only apply an amount of sealant that’s necessary. There is practically zero waste and minimal cleanup.

The Aeroseal process usually takes between one to a few hours, depending upon how much your system is leaking.

When the process concludes, you’ll soon notice a difference in the quality of your home’s indoor air.

Why It’s Important to Seal Leaks in Duckwork

Leaking ductwork robs your home of energy efficiency and comfort. Holes and gaps in duct systems and vents permit air to escape before it circulates through the home. Even with ductwork that was recently put in, any metal connection is a potential leaking point with proper sealant. This can result in uncomfortable, stuffy rooms and energy efficiency. Without a doubt, leaking ducts are a common cause of unnecessarily high heating and cooling bills.

The investment you’ve mad in your home is a significant one. Why not maximize that investment by making your HVAC system as efficient as it can be?

Automatically, Aeroseal will find and seal the leaks in your ductwork with precision. As a result, you’ll have a consistently comfortable home, healthier indoor air and save energy.

The Location of Return Vents

Return vents draw the indoor air from a room into return ducts and then direct it back into your HVAC system. Return vents are typically bigger than supply vents. You won’t feel air coming out of them.
Ductwork for return vents are usually found in the unconditioned areas of a home. For example, inside walls, under floors, crawlspaces or in attics. These areas are frequently difficult for contractors to access
without doing significant renovations.

Many homeowners tend to assume that a furnace filter is sufficient to collect the dust circulating inside their house. However, a leaking return vent can cause can put extra strain on your HVAC system. An unsealed, leaking air return system not only draws in dust, dirt and allergens but also pulls in humidity.
Once humidity is in the ductwork, it can cause comfort problems and mold growth. Sealing return ducts solves the risk of mold and moisture while keeping pollutants from circulating into your indoor air.

Ductwork Inspections and Cleaning for Your Illinois Home

Many Illinois residences are effectively sealed to avoid the loss of warm and cool air. When your furnace or central air conditioning is running, air circulates through your home in a system of ducts and vents. Along with losing that conditioned air through leaks, contaminants like mold, dust, viruses and allergens can make their way in. If these problematic contaminants are getting into your ductwork, the quality of your indoor air will decline. Unhealthy indoor air quality can trigger respiratory problems and allergies. Simultaneously, warm and cool air that leaks out of ducts can drive up your monthly energy consumption and utility bills.

Benefits of Sealing and Duct Cleaning
Heating and cooling systems that receive regular maintenance function better and cost less to run. They also have a longer lifespan than systems that are not maintained. At State Automatic, we provide inspections to determine if your home’s air ducts require cleaning or have leaks. Ideally, cleaning and sealing should be done at the same appointment to prevent pollutants from reentering your household. Benefits of ductwork cleaning include:

-Cleaner, healthier indoor air quality.
-Lower monthly utility bills.
-An HVAC system that’s highly efficient and lasts longer.

Basics of Air Quality

Ensuring that a living space is well ventilated serves to improve the quality of the indoor air. Insufficient indoor air quality poses significant health risks due to the accumulation and exposure to compounds such as mold.

Without a doubt, inadequate ventilation in a household is unhealthy. Low rates of air exchange increases the concentration of pollutants in the air. Environmental aspects like humidity, climate and temperature all influence when homeowners decide to ventilate their living space. Weak ventilation can also lead to moisture accumulation and mold.

It’s helpful to understand how the air inside your home or commercial building functions.

All buildings – whether they are residential or commercial – exchange their indoor air with outside air. The two ways this happens are pressure and temperature differences or air leaks.

All buildings have some type of air leaks through which air can move through. For instance, the areas around plumbing, pipes and chimneys along with gaps that form in between structures walls and windows.

Pressure and temperature variances help to circulate air into and out of buildings. Known as the stack effect, it is basically why warmer air rises up in a building. This takes place because warmer air is simply lighter than cool air. As warm air gets out of the higher levels through leaks, it lowers the pressure at the ground level.

Signs of Poor Indoor Ventilation
These are some typical warning signs of a home with poor ventilation:

-Glass and windows that look frosted because of condensation.
-The discoloration of wall tiles, floor and grout.
-Early indications of rust on plumbing fixtures.
-Mold forming on surfaces like wood or walls.
-Persistent unpleasant odors, the odor of mildew.
-Heat builds up but does not dissipate.

Condensation happens when warmer air meets a cool surface. It can also happen because of rising levels of humidity and poor ventilation. Condensation is most apparent on structural surfaces such as windows. It can also form, however, upon flooring, walls, furniture and wallpaper.

Condensation has a tendency to settle in porous materials and accumulate gradually over time. This can cause wood to rot and swell, while metal will rust. The most effective way to remedy a condensation problem is through ventilating the living space. Open doors and windows and use a dehumidifier to draw moisture from the indoor air.

For spaces such as an attic, condensation can be particularly problematic. Attics are usually warm, dark spaces that are vulnerable to mold growth and moisture. These spaces will usually feature intake and hot air vents to counter this problem.

Mold forms in humid settings because of moisture and condensation. For mold to develop it needs a food source, water and oxygen. Common materials such as wood, paper and drywall contain carbon.
Mold is able to consume carbon as a source of nutrients.

Effective ventilation helps prevent factors like condensation and humidity levels that lead to moisture build-up.

Ongoing exposure to mold can lead to cold and allergy symptoms.
Airborne Allergens and Contaminants
There are both outdoor and indoor contaminants that can settle in your residential or working space due to insufficient ventilation. A few examples of indoor air contaminants may include:

-Emissions from cleaning products, adhesives or even particle boards used in construction.
-Appliances that utilize gasoline for a source of fuel such as a furnace, cooking range or a water heater.

Examples of outdoor air contaminants include:

-Particulates and allergens.
-Mold spores.
-Dust particles primarily consisting of pollen and dirt.

Contact State Automatic to schedule an inspection of your ductwork or indoor air quality testing. Reach us at 630-879-8600.