Furnace St. Charles IL – State Automatic Heating & Cooling – Call 630-326-6330
Furnace St. Charles IL
Welcome to State Automatic! We are your reliable provider of fast and effective Furnace St. Charles IL solutions for your home or commercial location. Call us to schedule service or a FREE estimate. We also offer emergency services 24/7!
Perhaps the most essential major appliance, homeowners depend on their Furnace St. Charles IL to stay warm and comfortable when the fall, winter and even spring temperatures are chilly.
If your home’s furnace is showing signs of poor performance and you plan to look for a new one soon, it helps to brush up on some basic information about these essential appliances and how they function:
The fundamental parts of a gas Furnace St. Charles IL system generally include:
-A burner. This is the component that delivers and burns the fuel that provides warmth.
-A heat exchanger. This is where heat is produced from the burning fuel. The heat exchanger in the Furnace St. Charles IL directs warm air to the distribution system.
-Ductwork. A critical part of any system, the ducts purpose is to transfer heated air throughout the home or commercial structure.
-The flue or vent pipe. This vital component exhausts the by-products of combustion like water vapor or carbon dioxide safely out of the home.
Air Handling Systems
Single Stage Furnaces. Contemporary single stage furnaces have features such as an inducer, which draws in the most efficient volume of air into the unit. Other features include electronic ignition systems as a replacement for a pilot light on older models, and a blower that directs the heated air throughout the rooms in your residence.
These efficient components all work together to keep your home comfortable without driving up your monthly energy expenditures.
Two Stage Furnace. This type of Furnace St. Charles IL typically runs at lower capacity during most of its operational cycle to keep heating bills reasonable while sustaining your degree of comfort. During especially cold weather, the unit’s second stage is ready and available to produce more heat.
Variable Speed Furnace. These heating units move more air through the home for longer time periods. This efficient feature increases air quality with quality air filtration. Variable speed Furnace also offers substantial operating cost benefits.
Here’s are some answers to FAQs about furnaces that should give you a good idea on how to proceed if yours is showing signs of declining performance.
When should I replace my Furnace St. Charles IL?
You may want to replace your heating system if it’s more than 15 or 20 years old, or if it’s clearly not heating your home effectively. Contemporary heating units are about 60 percent more efficient than heating systems manufactured in the 1990s and early 2000s. Additionally, if not correctly taken care of, the performance of a furnace decreases.
What qualities do I want in a Furnace ?
Furnaces should be accurately sized to a home to provide adequate heat. State Automatic can provide you with a load calculation for your home to determine what size furnace would be right for your residence.
Also, if you or someone in your household have allergies or respiratory issues, look for a home heating system that can sufficiently filter the air in your home while it circulates.
How long can I plan on a new furnace to last?
According to industry research, most gas furnaces will perform for 20 to 25 years.
What’s involved in replacing an old Furnace St. Charles IL?
In addition to the placement of a new furnace, State Automatic’s experienced service techs will examine the other components of your heating system like the ductwork, insulation, wiring and your thermostat.
To further assist our customers so they make informed home heating decisions, here’s a quick look at some furnace-related terms you are likely to see in the course of your research:
Annual Fuel Utilization Efficiency (AFUE) – this key term describes a furnace’s heating efficiency. The government’s recognized minimum AFUE rating for furnaces is 78 percent.
Balance Point – an outside temperature, typically between 30 and 45 degrees, where the output of a heat pump is equal to the heating necessities of the home.
BTU – British thermal unit. This figure is the amount of heat needed to raise the temperature of one pint of water – approximately one pound – by one degree.
Split System – a heat pump or central air conditioning system with parts situated both outside and inside your home. Among the more common models for home use.
As the temperatures drop, most of us are ready to spend less time outdoors and more time inside where it’s cozy and warm. Thanks to our furnaces, we’re able to do just that. For more information or to set an appointment with a State Automatic service tech for repairs or replacement of your Furnace St. Charles IL give us a call today at 630-326-6330.
Here are a few fun facts you may not know about furnaces:
The most widely used way to heat homes, a Furnace St. Charles IL accomplishes its very important job by directing air through ductwork in the flooring, walls and ceiling. Energy sources for a Furnace St. Charles IL include natural gas, oil and electricity, or, in some cases, a combination of these. Natural gas systems are the most favored and usually the most cost-effective.
The ancient Romans are believed to be the first civilization to use warm air heating systems. Called a “hypocaust,” it circulated heated air through walls and flooring.
An early version of a steam-heating system was used in England to help grow grapes during cooler weather.
Furnaces help prevent your home’s pipes from freezing. When temperatures dip below 32 degrees, water lines in a home with no heating system are vulnerable to freezing if not used.
Very low humidity levels can actually cause a home to feel colder than its set temperature. A home kept at a higher humidity level, in contrast, can help a home feel warmer than its measured temperature.
Furnaces are made of three principal parts: a burner or a main heating element, a heat exchanger – which separates combustion gas and filtered air, and a blower. The blower circulates the heated air through the duct system in a house.
Furnaces generally have a long life span. While there are numerous factors that play a role in how long a furnace might last, conventional furnaces typically perform well for about 20 to 25 years.
For a good way to understand how heated air circulates through a building, consider the “stack effect.” The stack effect is a principle that refers to the movement of air through space and more specifically, how heated air moves upwards. During the cold winter season, warm air in a building is not as dense as the colder air outdoors.
Rising heated air helps the cold air be drawn into the lower levels of a house, which is why your home’s basement is likely to be significantly cooler than its higher floors. The stack effect is also why homes with inefficient or poorly sealed ductwork consume large amounts of energy just to maintain comfortable temperatures.
Consult with the Furnace St. Charles IL experts at State Automatic today for all your home comfort needs! We’re a family owned and operated company that has been serving homes and commercial clients with expert HVAC solutions for over 88 years. Count on us to keep your home comfortable next winter!
